SBR16 CNC Round Linear Guide Ways

The circular groove with reasonable ratio of linear guide rails not only has small contact force, but also greatly improves the sensitivity of load and stiffness to V-shaped plane spherical point contact.

TRH rail rolling body is to be designed with special four direction equal load capacity , it can bear the same rated load of its radial.

Mainly used in milling machinery, grind machine tools , bending machines, woodworking machines, etc.

Data unit is mm

Rack slides are specifically intended for mounting equipment into 19-inch racks or 23-inch racks. These can be friction bearing, ball bearing, or roller bearing. They are sized to fit into racks with mounting flanges on the ends to mate to the mounting holes in racks. In some cases, one mounting flange is formed into the rack slide with an adapter bracket attached to the other end to accommodate different depths of the rack. The outer fixed member is attached to the rack and the inner moving member is generally screwed to the side of the mounted equipment. Rack slides are typically compound or 3-part slides allowing full extension of the mounted equipment and generally include provision for sliding the inner member completely free to allow removal of the equipment from the rack. They can also include stops to prevent accidentally pulling the equipment out of the rack without releasing the stop mechanism.

There can be proprietary configurations which, for example, may clip to the equipment without the use of screws or can be clipped into an appropriately designed rack. But the basic geometry is the same regardless of how they are mounted.