Built-in Guide 800mm Stroke Motorized Linear Stage Fully Sealed Dust-Proof Industrial Robot Arm Linear Motion Guide

Our 45 Mm Linear Guides, miniature linear rail, linear rail shafts 12mm is favored by customers in many countries and regions, and the company's performance continues to grow steadily. We firmly believe that science and technology is the guide, quality is the foundation, and credit is the brand! We have our possess manufacturing facility and sourcing place of work. If you need any of our products, or have other items to be produced, please send us your inquiries, samples or detailed drawings. We hope to cooperate with a lot more friends for mutual added benefits.

The 15mm mini linear guide is a linear guide with a guide rail width of 15mm.

Linear guides compare linear bearings, have long service life, high load bearing capacity, high precision and stable performance.

The TRN12C/TRN12H mini linear guideways are mainly used in medical equipment, electronic equipment and linear motors.

Model	H	H1	N	W1	W2	W3	L1	L2	L3	L4	Mxd	H3	Weight
TRN7C	8	1.5	5	17	12	2.5	23.5	8	14.3	-	M2x2.5	1.5	10g
TRN7H	8	1.5	5	17	12	2.5	31	12	21.6	-	M2x2.5	1.5	14g
TRN9C	10	2	5.5	20	15	2.5	30	10	20.8	-	M3x3	2.2	19g
TRN9H	10	2	5.5	20	15	2.5	40.5	15	30.9	-	M3x3	2.2	28g
TRN12C	13	3	7.5	27	20	3.5	34	15	21.6	-	M3x3.5	2.7	35g
TRN12H	13	3	7.5	27	20	3.5	44	20	32	-	M3x3.5	2.7	52g
TRN15C	16	4	8.5	32	25	3.5	42	20	27.8	-	M3x4	3.1	64g
TRN15H	16	4	8.5	32	25	3.5	57	25	42.7	62	M3x4	3.1	95g

Data unit is mm

Two-piece plain bearings, known as full bearings in industrial machinery,^[11] are commonly used for larger diameters, such as crankshaft bearings. The two halves are called shells.^[12] There are various systems used to keep the shells located. The most common method is a tab on the parting line edge that correlates with a notch in the housing to prevent axial movement after installation. For large, thick shells a button stop or dowel pin is used. The button stop is screwed to the housing, while the dowel pin keys the two shells together. Another less common method uses a dowel pin that keys the shell to the housing through a hole or slot in the shell.

The distance from one parting edge to the other is slightly larger than the corresponding distance in the housing so that a light amount of pressure is required to install the bearing. This keeps the bearing in place as the two halves of the housing are installed. Finally, the shell's circumference is also slightly larger than the housing circumference so that when the two halves are bolted together the bearing crushes slightly. This creates a large amount of radial force around the entire bearing, which keeps it from spinning. It also forms a good interface for heat to travel out of the bearings into the housing.

• Fluid and magnetic bearings

Main articles: Fluid bearing and Magnetic bearing

Fluid and magnetic bearings can have practically indefinite service lives. In practice, there are fluid bearings supporting high loads in hydroelectric plants that have been in nearly continuous service since about 1900 and which show no signs of wear.

We insist on quality control on every part, focusing on every detail, providing customers with reliable, high-quality and efficient Built-in Guide 800mm Stroke Motorized Linear Stage Fully Sealed Dust-Proof Industrial Robot Arm Linear Motion Guide. We concerned about the introduction of foreign investors and strategic partners as a major impetus to development of our company. When you are keen on our business and products, please speak to us by sending us emails or call us quickly.