Why does the linear module generate heat during use and its solution?
Linear modules as mechanical products will inevitably present some large and small problems in the application process, such as mechanical wear and tear, mechanical defects, etc. When linear modules and other mechanical products are defective, if the problem is not dealt with in a timely manner, it may Presenting a lot of trouble.
Needless to say, the use of mechanical products can greatly improve work efficiency. Once mechanical equipment is defective, it will affect the production progress, and if it is serious, it will also affect the delivery time and then cause a breach of contract; therefore, in general, It is certainly best to deal with problems in a timely manner.
Today, we will introduce to us how to deal with the linear module if there is a heating phenomenon during the application. Under normal conditions, the linear module will have more or less heat during the application process. For example, when doing linear motion at high speed, the thermal energy will occur during the conflict process, which will cause the linear module to generate heat. This kind of fever is in the normal category, and there is no need to worry too much; if possible, stop the linear module for a few minutes, and then restart it.
In addition to normal heating, linear modules may have abnormal heating. For example, when the water droplets are on the linear module, it will vaporize immediately, and it will be accompanied by the problem of tremor; in this situation, it will draw our attention. If it is not processed in time, the linear module may be Damage due to heat. Worn the screws and guides. This affects the service life of the linear module.
If the linear module exhibits this abnormal heating phenomenon, and it is also accompanied by chattering, according to market response testing and research by mechanic engineers, it is usually caused by the slider, which is caused by the slider, that is, Said that the slider is the root cause of this abnormal heating phenomenon, so the user must consider checking whether the slider part is abnormal, or directly replace the slider.
In the process of using the linear module, if there is a heating problem, it is generally the two phenomena mentioned in the above article. We can judge according to the heating status of the linear module we are using, and then analyze and deal with the specific problems. The above is the answer on how to deal with the problem of heating caused by the linear module in the process of use. I hope it can help us.