Manufacturers warn of reasons for easy damage to linear guides

- Jul 15, 2020-

Manufacturers warn of reasons for easy damage to linear guides

      When you use it, because you don't pay much attention to the two points mentioned by the following manufacturers! As a result, the linear guide is easily damaged. Under what circumstances is it easy to damage? Below, the straight manufacturers will tell you the reasons for the damage:


1.Vibration

      In normal use, vibration is quite sensitive to the damage of the guide rails, which are specifically manifested as flaking, indentation, corrosion, cracks, wear, etc., which will be reflected in the vibration measurement. Therefore, the use of a dedicated linear guide vibration measurement device (frequency analyzer, etc.) can measure the magnitude of the vibration, and infer the specific abnormal situation based on the frequency. Because the use of the guide rail or the installation position of the sensor is different, the measured value is also different, so the measured value of each machine needs to be analyzed and compared before determining the judgment standard.